At any rate, I cannot get the processor to acknowledge or respond to anything on the serial line. Note that when using RedBoot, these options are usually inactive as it is RedBoot that decides which channels are used. Note that unlike the USART devices, the serial debug port does not support modem control signals such as those used for hardware signals. As of now, we only have the internal ROM as memory to work with I noticed that we connected jtagsel pin high and I belive it coused our problems.
|Date Added:||24 July 2008|
|File Size:||44.74 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
We do not want to develop the board further until we know the processor is working. At any rate, I cannot get the processor to acknowledge or respond to anything on the serial line.
I nearly finished adopting DataFlash programer to our paralell, I hope it qt91rm9200 correctly. But I do see that my host PC has an “unknown usb device” icon in the hardware device manager. Then I set up the hardware from main: Comments are the property of their submitters. Please tell we when you are successful with your usb implementation.
Will dig it tommorow mornig and report my afforts.
My init called before MMU is basically this: I think that the problem lies with the fact at91rj9200 internal rom code already initialize pll and other stuff and then my boot program becomes inconsistent. My problem is that if I program the TWI eeprom with the same code, it does nothing.
Specifications listed for the JetBox w include: They seems ok, however, the usb is still not functioning. They work so well we would not go back to Raven. Operations are usually performed with global interrupts disabled, and thus this mode is not usually suitable for deployed systems.
Please have you any clues? For example, the JetBox w can transfer data from PLCs to control center computers or control setial serial devices from remote sites, says the company.
If the driver is shared with the GDB debugging port, it will prevent ctrl-c operation when debugging. This support can be enabled on any port.
Rugged Linux box offers Ethernet access to serial gizmos
Perhaps the internal boot code has problems with other settings than the official atmel board? No registered users and 0 guests. I woould like to guess this is the cause but just can’t spot the problem yet.
Note that at9rm9200 using RedBoot, these options are usually inactive as it is RedBoot that decides which channels are used. That driver package should also be consulted for documentation and configuration options. The distribution also includes our old eerial Busybox, along with a variety of other Linux networking and webserver packages.
I use this basic startup on all my projects. I have a jumper on PA31 which is used if all goes wrong out in the field. When using both of its power inputs, the JetBox w runs on 5.
One thing is that the usb interrupt does not occur at all. I would prefer to load programs via a serial connection as opposed to JTAG. Operationg system — Linux 2.
You can then store the settings for automatic loading of specific configurations. My question is regarding the procedure to load the initial boot software: Note that unlike the USART devices, the serial debug port does not support modem control signals such as those used for hardware signals.
Esrial is online Users browsing this forum: I use a boot program which works if I upload it after hardware reset directly in the internal sram via a jtag probe it initializes plls, sdram,